Sanyo SRT-7072 Instruction Manual Download

Page: 29 / 44

SPECIAL PLAYBACK

Picture Search (Forward and Reverse)

Turn the SHUTTLE ring clockwise (or
counterclockwise), during normal playback. See
“SHUTTLE Ring Operation”.

The image can be seen while the tape is
advanced (or rewound) at high speed.

To return to normal playback, release the SHUTTLE
ring.

NOTES:

During picture search, noise (horizontal bars) will
appear in the picture.

The sound is muted.

Still Image

Press the STILL/PAUSE button, during normal
playback.

A still image can be viewed.

To return to normal playback, press the PLAY button.

NOTES:

If still mode continues for 5 minutes or more, the VCR
will go into stop mode to avoid damaging the tape.

If the image is unstable (rolling vertically), adjust the
vertical lock control to correct.

Frame Advance

Turn the JOG dial clockwise (or counterclockwise),
during still image mode.

The still image is advanced (or rewound) of one
image (field).

Turn the dial faster to increase the speed of the
frame advance.

To return to normal playback, press the PLAY button.

NOTES:

During reverse frame advance, noise will appear in the
picture.

If frame advance mode continues for 5 minutes or
more, the VCR will go into stop mode to avoid
damaging the tape.

Reverse Playback

Turn the SHUTTLE ring counterclockwise and hold it,
during normal playback. See “SHUTTLE Ring
Operation”.

Reverse playback will start.

To return to normal playback, release the SHUTTLE
ring.

NOTES:

During reverse playback, noise will appear in the
picture.

Reverse playback is only possible during 8-hour
playback speed mode.

The sound is muted.

Slow motion (Forward and Reverse)

Turn the SHUTTLE ring clockwise (or
counterclockwise) and hold it, during still image mode.
See “SHUTTLE Ring Operation”.

Forward (or reverse) slow motion playback will
start.

To return to normal playback, press the PLAY button.

NOTES:

If slow motion mode continues for 5 minutes or more,
the VCR will go into stop mode to avoid damaging the
tape.

The sound is muted.

RC4QR/U3 (SRT-7072 GB) Tue. June, 29/1999

English

Summary of Contents for SRT-7072












































Search results

Summary of Contents for SRT-7072

Reviews:

Related manuals for SRT-7072

Brands by name

Popular brands

Sanyo SRT-7072, Instruction Manual

Search results

Summary of Contents for SRT-7072

Reviews:

Related manuals for SRT-7072

Brands by name

Popular brands