Sanyo Sprint SCP-3810, User Manual

Page: 25 / 160

Phone Bas
ics
2A. Phone Basics 13
Turning Your Phone On and Off
Turning Your Phone On
䊳
Press and hold .
Once your phone is on and finds a signal, it
automatically enters standby mode – the phone’s idle
state. At this point, you are ready to begin making and
receiving calls.
If your phone is unable to find a signal after 15 minutes
of searching, a Power Save feature is automatically
activated. When a signal is found, your phone
automatically returns to standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also
initiate a search for Sprint service by pressing any key
except numbered keys.
Others
TTY
– Your phone is connected to a TTY device.
Alarm – An alarm or countdown is set.
Notification
– You have events, alarms, or
countdown notifications, or your Contacts list
has been backed up to Sprint’s website using
Wireless Backup.
HAC Enabled – Your phone’s HAC setting is
enabled.
Tip The Power Save feature conserves your battery
power when you are in an area where there is no
signal.