Sanyo SCP5400 - RL2500 Cell Phone 640 KB, User Manual

Page: 106 / 205

Selecting a Ringer/Image Type for an Entry
You can assign a ringer/image type to a Contacts entry so you can identify
the caller by the ringer or image type. (See “Ringer Types” on page 43.)
To select a ringer/image type for an entry:
1.
Press on the Navigation key.
2.
Select the entry for which you want to set the incoming ringer
or image and press
.
3.
Highlight a phone number and press
Options
(right softkey),
highlight Edit , and press .
– or –
Highlight an Email address or Web address, and press
Edit
(right
softkey).
4.
Select the menu under
Ringer
or
Image
by scrolling up or down
and press .
5. Highlight your desired ringer type or image and press .
Ringer & Voice to notify you with Ringer and Voice. (Ringer
only.)
Vibrate
to notify you by vibrating. (Ringer only.)
Get New
to start up the browser and you can select an item
to download.
Normal to use the current With Caller ID or Roaming setting
for Ringer (see page 43) or to use the current Incoming
Calls setting for Image (see page 52).
None to turn the ringer/image setting off.
6.
Press
Save
(left softkey).
To confirm the ringer, highlight
Ringer
and press
Play
(right
softkey).
To see a display preview, press
Preview
(right softkey)
during step 5 above. Then press
Sub LCD
(right softkey) to
see the Sub LCD preview. (You may also check the image
through the external display.)
If you set an animation ringer (indicated with icon) and
an image, your PCS Phone plays the ringer (audio) of the
animation ringer and displays the image you selected.
You need to have downloaded data to set image.
Section 2: Understanding Your PCS Phone
2G: Using the Contacts Directory 95