Caution:
Be sure to turn the ON/OFF switch to the "OFF" position and disconnect
the
power cord from the wall outlet before cleaning the filters.
Remove the filter cover.
Gently clean the air outlet filter with water.
CLEANING THE SUB-FILTER
Clean the sub-filter when it becomes dirty.
Remove the dust compartment
(refer to page 8).
Remove the air inlet cover.
Remove the sub-filter from the vacuum
cleaner.
Gently clean the sub-filter with water.
Make sure that it is completely dry and
then re-install it into the vacuum cleaner.
Replace the air inlet cover and the dust
compartment.
Caution
: Do not wash the air outlet filter and sub-filter in a washing machine, and do not
use any other equipment such as a hair dryer to dry it. Do not operate the vacuum
without the sub-filter. Be sure the filter is dry and properly installed. Failure to do
so could result in electrical shock, personal injury, or motor failure.
CLEANING THE SECONDARY FILTERS
1
1
2
2
3
3
4
Air Outlet Filter
10
The secondary filters consist of a general filter and a sub-filter.
Only use genuine Sanyo replacement filters.
Remove the air outlet filter from the filter cover.
Filter Cover
1
1
1
1
2
2
Sub-Filter
2
2
1
1
Air inlet
Cover
CLEANING THE AIR OUTLET FILTER
Make sure that it is completely dry and then
re-install it into the filter cover.
4
Replace the filter cover.
5
