12
SETTING THE TIMER
In the descriptions below, the following settings are used for the
temperature and time indicator selector button on the bottom front
section of the remote control.
• Temperature: °C
• Time: AM, PM
1. How to set the present time
(Example) To set to 10:30 pm.
2. How to set the OFF time
(Example) To stop the air conditioner at 11:00 am.
3. How to set the ON time
(Example) To start operation at 7:10 am.
4. How to set daily ON/OFF repeat timer
(Example) To start operation at 7:10 am. and stop the air
conditioner at 11:00 am.
• The ON/OFF combination timer uses the current time as the
reference, and it is activated starting from whichever set time
comes first.
• With the ON/OFF combination timer, the settings are repeated
every day.
• You can check the timer ON/OFF times after you have set them
by pressing the ON TIME and OFF TIME setting buttons.
To cancel a timer program
• Press the CANCEL button.
• When either an ON or OFF timer is to be canceled, press the
button corresponding to the timer whose program is to be
canceled, and then press the CANCEL button.
• The airflow direction, fan speed and temperature setting can be
changed after a timer program has been set even when the unit
is stopped. Even when operation is stopped during an ON timer
program, the unit will start operating when the set time is
reached provided that the program is not canceled.
• When the ON timer and OFF timer are set to the same time, the
timer operates as if it is turned off.
Operation
Indication
1.
Press the CLOCK button
once if the time indicator is
not flashing.
The time indication alone
flashes.
2.
Press the Advance, Return
(
,
) button until PM 10:30
is displayed.
The time can be set in 1-
minute increments. Holding
down the button advances the
time rapidly in 10-minute
increments.
3.
Press the CLOCK button
again.
This completes the setting of
the current time.
Operation
Indication
1.
Press the OFF TIME setting
button once.
The timer
indication is
displayed, and the present OFF
time is shown.
2.
Press the Advance, Return
(
,
) button until AM
11:00 is displayed.
The timer
indication
blinks.
The time can be set in 10-
minute increments. Holding
down the button advances the
time rapidly in 10-minute
increments.
3.
Wait a few seconds, and
then the setting is complete.
The timer
indication
stops blinking and the present
time is displayed.
NOTE
Operation
Indication
1.
Press the ON TIME setting
button once.
The timer
indication is
displayed, and the present ON
time is shown.
2.
Press the Advance, Return
(
,
) button until AM 7:10
is displayed.
The timer
indication
blinks.
The time can be set in 10-
minute increments. Holding
down the button advances the
time rapidly in 10-minute
increments.
3.
Wait a few seconds, and
then the setting is complete.
The timer
indication
stops blinking and the present
time is displayed.
Operation
Indication
1.
Set the timer ON/OFF times
as shown in 2-1, 2, 3 and 3-
1, 2, 3.
The present time 10:30 pm.
and
are
displayed.
7:10 am.
ON
11:00 am.
OFF
10:30 pm.
Present time
NOTE
NOTE
OI-003-12-EG
01_SAP-KRV186EH_EN.fm Page 12 Wednesday, February 13, 2008 1:12 PM
