7
LISTENING TO THE RADIO
1.
Press the
z
/ON button to turn the power on,
the “POWER” indicator light.
2.
Set the FUNCTION switch to AM or FM or
FM ST..
3.
Turn the TUNING control to tune in a station.
4.
Adjust the VOLUME control as desired.
5.
To turn the radio off, set the FUNCTION
switch to CD.
To improve reception
-
For AM reception, rotate or relocate the unit
to a different position to improve the recep-
tion of a distant or weak station.
-
For FM reception, a short wire aerial is
provided. Unwind the short wire aerial and
extend it to full length.
Note:
If the signal from an FM stereo station is weak
and reception is poor, set the FUNCTION switch
to FM to change to the monaural mode. The
reception may be improved, but the sound will
be monaural.
WAKE-UP TIMER SETTING
To set the first wake-up time
1.
Set the ALARM SELECTOR switch to
ALARM SET 1.
2.
Press the HOUR or MINUTE button.
To set the second wake-up time
1.
Set the ALARM SELECTOR switch to
ALARM SET 2.
2.
Press the HOUR or MINUTE button.
NOTE:
-
Do not set the ALARM SELECTOR switch
to ALARM 1+2, ALARM ON 1 or ALARM ON
2 when wake-up time setting.
-
If you want to check the time setting, set the
ALARM SELECTOR switch to different
position.
Changing a programme
To add a new track to a programme
1.
In the stop mode, press the PROGRAM
button repeatedly until the last programmed
number appears on the display.
2.
Select a track as explained above.
3.
Press the PROGRAM button.
To change a tracks:
1.
In the stop mode, press the PROGRAM
button repeatedly until the selection to be
replaced is displayed.
2.
Select a track as explained above.
3.
Press the PROGRAM button.
Note:
Programmed details cannot be partially deleted
or inserted.
RM-D500/AU
27/08/2003, 12:10
7
