USING THE WAKE-UP TIMER
1.
If you want to wake up with the radio, tune in the station and adjust the volume level
first.
2.
Set the wake-up time. (See “WAKE-UP TIME SETTING”.)
3.
Set the
FUNCTION
switch to
ALARM-RADIO
or
ALARM-BUZZER
.
ALARM-RADIO
: Wake up with the radio
ALARM-BUZZER
: Wake up with the buzzer.
4.
Set the
ALARM
switch to the appropriate position:
a) For
ALARM 1
to sound, set the
ALARM
switch to
ALARM 1
. The
ALARM 1
indica-
tor will be displayed.
b) For
ALARM 2
to sound, set the
ALARM
switch to
ALARM 2
. The
ALARM 2
indica-
tor will be displayed.
c)
For both
ALARM 1
and
2
to sound, set the
ALARM
switch to
ALARM 1+2
. The
ALARM 1
and
2
indicators will be displayed.
When the timer
ON
time arrives, the radio or buzzer will sound for approximately 59 min-
utes and then turn off automatically. The wake-up timer will function every day unless it is
released.
To release the timer, set the
FUNCTION
switch to
OFF
.
SNOOZE MODE
During the wake-up timer is operating, press the
SNOOZE
button. The radio or buzzer
will stop for approximately 7 minutes but will start again and this will be repeated.
NOTES:
-
If the
SNOOZE
button is not pressed, the radio or buzzer will sound for approxi-
mately 59 minutes and then turn off automatically.
-
To cancel the snooze mode, push the
SLEEP
button or set the
FUNCTION
switch to
OFF
.
6
NOTE:
-
Do not set the
ALARM
switch to
ALARM 1+2
when wake up time setting.
-
If you want to check the time setting, simply push the
ALARM
button.
RM-6090/AU
10/05/2003, 9:49
7
