manualshive.com logo in svg

Sanyo QuaDrive PLC-HF15000L, Owner'S Manual, Page: 146 / 162

Share
Download
Sanyo QuaDrive PLC-HF15000L Owner'S Manual Download Page 146

46

Chapter 4 Controlling the Projector

Indication of the lamp status

Icon display/background

Status

White/Blue

Lamp on (Normal)

White/Red

Lamp on (Lamp is being used over a specified use time, replace lamp 
immediately)

Gray/Blue

Lamp off (Normal)

Gray/Red

Lamp off (Lamp is being used over a specified use time, replace lamp 
immediately)

Red/Blue with X

Lamp failure (Lamp failure, check lamp condition)

Red/Red with X

Lamp failure (Lamp failure and lamp is being used over a specified use 
time, replace lamp immediately)

Icon display/background

Status

Blue

Good condition.

Yellow/Gray

Filter is almost clogged.

Red/Gray

Filter is clogged. Replace a filter with new one.
* When the projector cannot decode the return from the AMC unit, this 

icon also appears. 

Indication of the filter status

Summary of Contents for QuaDrive PLC-HF15000L



































































































































































Reviews:

No comments