background image

ENGLISH

n

We reserve the right to change specifications without notice.

n

All trademarks used in this user manual are the property of their respective owners.

n

This manual is printed on recycled paper.

FCC DECLARATION OF CONFORMITY

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for Class A Personal Computers and
peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the device is operated in a residential environment. This device generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. Operation of  this device in a residential area is
likely  to cause harmful interference in which case the user will be required to correct the interference at his
own expence.

CAUTION

Changes or modifications not expressly approved by manufacturer could void the users

authority to operate the device under FCC compliance regulations.

This Class A  digital apparatus complies with Canadian  ICES-003.

Cet appareil numérique de la classe A est conforme à  la norme NMB-003 du Canada.

CANADIAN NOTICE

CE MARKING DECLARATION OF CONFORMITY

This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/

EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.

WARNING        

This is a class A product. In a domestic environment this product may cause radio inter-

ference in which case the user may be required to take adequate measures.

Summary of Contents for PLL405WP-B0X1
















Reviews: