background image

5

All the safety and operating instructions should be read 
before the product is operated.

Read all of the instructions given here and retain them 
for  later  use.    Unplug  this  projector  from AC  power 
supply  before  cleaning.  Do  not  use  liquid  or  aerosol 
cleaners.  Use a damp cloth for cleaning.

Follow  all  warnings  and  instructions  marked  on  the 
projector.

For added protection to the projector during a lightning 
storm, or when it is left unattended and unused for long 
periods  of  time,  unplug  it  from  the  wall  outlet.    This 
will  prevent  damage  due  to  lightning  and  power  line 
surges.

Do not expose this unit to rain or use near water... for 
example,  in  a  wet  basement,  near  a  swimming  pool, 
etc...

Do  not  use  attachments  not  recommended  by  the 
manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, 
or table.  The projector may fall, causing serious injury 
to a child or adult, and serious damage to the projector.  
Use  only  with  a  cart  or  stand  recommended  by  the 
manufacturer,  or  sold  with  the  projector.    Wall  or  shelf 
mounting should follow the manufacturer's instructions, 
and  should  use  a  mounting  kit  approved  by  the 
manufacturers.

An appliance and cart combination 
s h o u l d  b e  m o v e d  w i t h  c a r e .  
Quick  stops,  excessive  force,  and 
uneven  surfaces  may  cause  the 
appliance  and  cart  combination  to 
overturn.

Slots  and  openings  in  the  back  and  bottom  of  the 
cabinet  are  provided  for  ventilation,  to  ensure  reliable 
operation  of  the  equipment  and  to  protect  it  from 
overheating.

The  openings  should  never  be  covered  with  cloth  or 
other materials, and the bottom opening should not be 
blocked by placing the projector on a bed, sofa, rug, or 
other  similar  surface.    This  projector  should  never  be 
placed near or over a radiator or heat register.

This  projector  should  not  be  placed  in  a  built-
in  installation  such  as  a  book  case  unless  proper 
ventilation is provided.

Never  push  objects  of  any  kind  into  this  projector 
through  cabinet  slots  as  they  may  touch  dangerous 
voltage  points  or  short  out  parts  that  could  result  in  a 
fire or electric shock.  Never spill liquid of any kind on 
the projector.

Safety Instructions

Do not install the projector near the ventilation duct of 
air-conditioning equipment.

This  projector  should  be  operated  only  from  the  type 
of power source indicated on the marking label.  If you 
are not sure of the type of power supplied, consult your 
authorized dealer or local power company.

Do  not  overload  wall  outlets  and  extension  cords  as 
this  can  result  in  fire  or  electric  shock.    Do  not  allow 
anything to rest on the power cord.  Do not locate this 
projector where the cord may be damaged by persons 
walking on it.

Do  not  attempt  to  service  this  projector  yourself 
as  opening  or  removing  covers  may  expose  you 
to  dangerous  voltage  or  other  hazards.    Refer  all 
servicing to qualified service personnel.

Unplug  this  projector  from  wall  outlet  and  refer 
servicing  to  qualified  service  personnel  under  the 
following conditions:
a.When the power cord or plug is damaged or frayed.
b.If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d.If  the  projector  does  not  operate  normally  by 

following  the  operating  instructions.  Adjust  only 
those  controls  that  are  covered  by  the  operating 
instructions as improper adjustment of other controls 
may result in damage and will often require extensive 
work by a qualified technician to restore the projector 
to normal operation.

e.If the projector has been dropped or the cabinet has 

been damaged.

f. When  the  projector  exhibits  a  distinct  change  in 

performance-this indicates a need for service.

When  replacement  parts  are  required,  be  sure  the 
service  technician  has  used  replacement  parts 
specified  by  the  manufacturer  that  have  the  same 
characteristics  as  the  original  part.    Unauthorized 
substitutions may result in fire, electric shock, or injury 
to persons.

Upon  completion  of  any  service  or  repairs  to  this 
projector, ask the service technician to perform routine 
safety checks to determine that the projector is in safe 
operating condition.

Summary of Contents for PLC-XW57





































































Reviews: