Part Names and Functions
Rear Terminal
⑦
S-VIDEO IN
Connect the S-VIDEO output signal from video
equipment to this jack (p.17).
⑩
AUDIO IN
Connect the audio output signal from video
equipment connected to
⑦
or
⑪
to this jack. For a
mono audio signal (a single audio jack), connect it
to the L (MONO) jack (p.17).
⑨
COMPUTER 1 / COMPUTER AUDIO IN
Connect the audio output (stereo) from a computer
or video equipment connected to
②
or
④
to this
jack (pp16, 18).
⑪
VIDEO IN
Connect the composite video output signal to this
jack (p.17).
②
COMPUTER IN 1 / COMPONENT IN
Connect output signal from a computer, RGB scart
21-pin video output or component video output to
this terminal (pp.16,18).
⑧
AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack
(pp.16-18).
This terminal outputs sound from AUDIO IN
terminal (
⑨
or
⑩
).
③
MONITOR OUT
This terminal can be used to output the incoming
analog RGB signal from COMPUTER IN 2 / DVI-I
terminal or COMPUTER IN 1/COMPONENT IN
terminal to the other monitor (p.16).
⑤
LAN Connection Terminal
Connect the LAN cable (refer to the owner’s manual
“Network Set-up and Operation”).
⑫
USB Connector (Series B)
In order to operate the computer with the remote
control and use the PAGE
▲▼
buttons on the
remote control during a presentation, connect the
USB port of the computer to the USB terminal with
a USB cable (not supplied) (p.16).
⑥
USB Connector (Series A)
Connect the USB cable (refer to the owner’s manual
“Network Set-up and Operation”).
②
③
①
④
⑤
⑥
⑩
⑦
⑨
①
CONTROL PORT
When the projector is controlled by a computer,
connect to this jack with serial control cable.
④
COMPUTER IN / DVI-I
Connect computer output (Digital/Analog DVI-I type)
to this terminal (p.16).
⑧
⑪
⑫
Summary of Contents for PLC-XU305 XGA
Page 81: ...KG5AE ...