Sanyo PLC-XF40 Owner'S Manual Download | Manualshive

Page: 22 / 52

background image

22

BASIC OPERATION

TURNING ON PROJECTOR

TURNING OFF PROJECTOR

TURNING ON / OFF PROJECTOR

Power off?

Message disappears after 4 seconds.

Connect a projector's AC Power Cord into a wall outlet and turn
MAIN ON / OFF SWITCH to ON. LAMP indicator lights RED,
and READY indicator lights GREEN.

Press POWER ON-OFF button on Side Control or on Remote
Control Unit to ON. LAMP indicator dims, and Cooling Fans start
to operate. Preparation Display appears on a screen and count-
down starts. Signal from source appears after 30 seconds.
Current Input position and Lamp status are also displayed on
screen for 5 seconds. (Refer to "LAMP MANAGEMENT" on
page 45.)

2

3

Press power ON-OFF button on Side Control or on Remote
Control Unit, and a message "Power off?" appears on a screen.

1

2

TO MAINTAIN LIFE OF LAMP, ONCE YOU TURN
PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE
TURNING IT OFF.

When WARNING TEMP. indicator flashes red, projector is automatically turned off. Wait at least 5 minutes before turning on
projector again.

When WARNING TEMP. indicator continues to flash, follow procedures below:
1. Turn MAIN ON / OFF SWITCH to OFF and disconnect AC Power Cord from an AC outlet.
2. Check Air Filters for dust accumulation.
3. Clean Air Filters. (See "AIR FILTER CARE AND CLEANING" section on page 44.)
4. Turn a projector on again.

If WARNING TEMP. indicator should still continue to flash, contact sales dealer where you purchased this projector or
service center.

1

Complete peripheral connections (with Computer, VCR, etc.)
before turning on projector. (Refer to "CONNECTING TO
PROJECTOR" on Pages 12~15 for connecting that equipment.)

3

30

Preparation Display disappears after
30 seconds.

When Power Management function is ON, projector detects signal interruption and turns off Projection Lamp automatically.
Refer to “Power Management” on pages 40 and 41.

Press power ON-OFF button again to turn off projector. LAMP
indicator lights bright and READY indicator turns off. After
approximate 90 seconds, READY indicator will light green again
and projector may be turned on by pressing power ON-OFF
button.

Cooling fans will operate for approximate 2 minutes after projec-
tor is turned off. To power down completely, turn MAIN ON/OFF
SWITCH to OFF and disconnect AC Power Cord.

LAMP STATUS

INPUT 1

1

2

4

3

«
...
20
21
22
23
24
...
»

Summary of Contents for PLC-XF40





















































Reviews:

No comments

Related manuals for PLC-XF40

Brand: Samsung Pages: 53

Brand: Barco Pages: 59

Brand: Enercell Pages: 14

Brand: Barco Pages: 8

Brand: Eaton Pages: 2

Brand: BenQ Pages: 4

Entero RPMHD-LED01

Brand: Christie Pages: 70

Stories Projector LTC050 Series

Brand: LEXIBOOK Pages: 2

Grand Cinema HT C3X-LINK

Brand: Sim2 Pages: 37

Brand: Barco Pages: 57

Brand: Panasonic Pages: 167

Brand: Barco Pages: 22

Brand: Mitsubishi Pages: 30

Brand: VitrineMedia Pages: 17

Brand: Acer Pages: 2

PD1320Wi Series

Brand: Acer Pages: 2

Brand: Acer Pages: 2

Brand: Acer Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands