-15-
5.
LCD
PANEL
/P
RISM ASSEMBLY AND
LCD
PANEL
REMOVAL
.
1. Remove 4 screws A and remove the LCD panel /Prism assembly.
2. Remove 3 screws B and remove the LCD panel.
Note:
D
ON
'
T REMOVE THE
R
ED
, G
REEN AND
B
LUE
LCD
PANELS SIMULTANEOUSLY
!
It becomes impossible to adjust a convergence, if all the LCD panels are
simultaneously replaced. When all the LCD panels are damaged, replace
the whole LCD panel / prism assembly.
LCD panel /Prism
assemb
ly
Blue LCD P
anel
Red LCD P
anel
Green LCD P
anel
Never touch
the electrode of flexible cables.
A
A
A
A
B
B
B
LCD panel /Prism assembly
Caution :
HANDLE WITH CARE
!
LCD panel/Prism assembly is a precision part. Be sure
to handle this part with special attention. Observe the
following notes.
(1) Be careful not to hit the LCD panel with the screwdriver. It
may damage the parts and alignment.
(2) Never touch the LCD panel and prism part directly with
hand. Otherwise the optical parts may get dirty.
(3) Since the LCD panel is equipped with CMOS-LSI, pay
attention to static electricity. And never touch the elec-
trode of flexible cables.
