Sanyo PLC-XE32, Owner'S Manual

Page: 26 / 68

Basic Operation
4
black out

the captured image

normal

• • • • •
Press the NO SHOW button on the remote control to
black out the image. To restore to normal, press the NO
SHOW button again or press any other button. When
a projected image is captured and set as "User" in the
Logo selection (p.4), the screen changes each time
you press the NO SHOW button as follows.
NO SHOW button
Press the AUTO PC button on the remote control to
operate the Auto PC function. For more detail, see
page 7.
AUTO PC button
Press the D.ZOOM buttons on the remote control to
zoom in and zoom out the images. For more detail, see
page 33.
D.ZOOM buttons
Press the P-TIMER button on the remote control. The
timer display "00 : 00" appears on the screen and the
timer starts to count time (00 : 00 ~ 59 : 59).
To stop the P-Timer, press the P-TIMER button. Press
the P-TIMER button again, then the P-timer display
disappears.
P-TIMER button
Press the IMAGE button on the remote control to select
a desired image level of the screen. For more detail,
see pages 30 and 37.
IMAGE button
For detail, see page .
KEYSTONE button
LAMP CONTROL button
Press the LAMP CONTROL button on the remote
control to select the lamp mode for changing the
brightness of the screen.
High.........Brighter than the Normal mode.
Normal.....Normal brightness.
Auto.........Brightness according with the input signal.
Remote Control
D.ZOOM buttons
NO SHOW button
AUTO PC button
(See p.7.)
 Note:
See the previous page for the
other buttons.
KEYSTONE button
(See p.)
POINT ▲▼ buttons
The message disappears after 4 seconds.
P-Timer display
LAMP CONTROL
button
P-TIMER button
IMAGE button
/- buttons
(See p.3.)