Sanyo PLC-WXU30, Service Manual, Page: 60 / 130

-60-
Troubleshooting
No Sound
Check IC5001 and peripheral circuit.
Check 5V_AUDIO, 1V power supply.
check if the audio sig-
nal is observed at pins 7
and 15 of Ic5001.
Check audio output circuit.
Check speaker, connection of the terminal “K8F”
Yes
No
Check following steps.
Check IC5031, 5V_AUDIO and peripheral circuit.
Check the Mute signal at pin 1 of IC5031. The Mute signal is output from
pin 9 of IC 301<Scaler>. The OUT_DET signal is sent from Audio Out
terminal.
Mute-On: H at pin 347 of IC301, L at pin1 of IC5031
check if the audio sig-
nal is observed at pins 5
and 8 of Ic5031.
Yes
No