Sanyo PLC-SW10, Service Manual, Page: 17 / 93

-16-
Optical Parts Disassemblies
1) Remove the cabinet top, front, main and component boards following to
“Mechanical Disassemblies”.
2) Remove each screw and take the each polarized glass-in ass’y off
upward.
3) Release 2 hooks and remove the polarized glass-in.
5. POLARIZED GLASS-IN ASS’Y DISASSEMBLY
Hook
Polarized Glass-In
Fig.5-
2
Fig.5-
1
1) Remove the cabinet top, front and main boards following to “Mechanical
Disassemblies”.
2) Remove 4 screws by using the 2.0 mm hex driver and take the LCD
Panel/Prism ass’y off upward from the optical unit.
3) Remove each screw and take the each polarized glass-out off upward.
6. POLARIZED GLASS-OUT ASS’Y DISASSEMBLY
* Mount the polarized glass as the surface
attached the phase sheet comes to the
prism side.
Polarized Glass-Out
LCD Panel/Prism
Ass’y
LCD Panel/Prism Ass’y
Fig.6-
2
Fig.6-
1
Phase Sheet
* Mount the polarized glass as the
surface attached the phase sheet
comes to the LCD panel side.
LCD Panel
Note:
Do not replace the LCD
panel separately otherwise
it can not obtain proper pic-
ture.