Sanyo PDG-DSU21B, Service Manual

Page: 12 / 60

PDG-DSU21 8
4. Click [USB Device Identification].
5. Set the items on the [Vendor 0x451, Product 0x2000 ].
6. Click [OK]
7. Move the cursor to [Flash Loader] on the Project window of [DLP Composer Lite] . (The
[Flash Loader] screen will appear.)
8. Click [Browse] and select where the firmware [xxxxxxxxx.img] is for download.
9. Make sure [Skip Boot Loader Area] is with a check.
10. Press Menu and Power buttons constantly and then give power supply (switch power on).
Power LED and Lamp LED will become amber. That indicates the projector is in the download
mode. At this moment, you can release these two buttons.
11. Click
[Start Download] . When the dialog box is displayed, click [Yes] .
Put checkmark next to [Skip
Boot Loader Area]
，
VALUE
SETTING 32KB
Click [Browse]
and select
Click
[Start Download]