Sanyo LMU-TK29C1, User Manual, Page: 10 / 31

18 17
LCD Monitor Instructions
Adjustment Procedure
A. Picture Menu
If you wish to adjust the screen finely or in case the result adjusted by Auto Adjust (see
page 33) sequence is not sufficient enough, adjust the screen manually.
Adjust the brightness
1
1.
Select [ picture ] on the Main menu and press the [ENTER] button.
You can see the cursor moving to the Sub menu.
Manual Adjustment
picture
advanced
pip
adv pip
options
utilities
Main menu
(Ex.)
Sub menu
brightness 25
- +
contrast 50
- +
H position 50
- +
V position 50
- +
phase
15
-
+
1056
frequency
-
+
scaling Wide
2.
Select [ brightness ] on the Sub menu and press the [ENTER] button.
The selected item of [ brightness ] turns blue.
3.
Use the [ ] and/or [ ] button to adjust. (Interval: 0~100)
By pressing the [ ] button, the whole screen is brighter.
By pressing the [ ] button, the whole screen is darker.
Adjust the contrast
2
1.
Select [ picture ] on the Main menu and press the [ENTER] button.
You can see the cursor moving to the Sub menu.
picture
advanced
pip
adv pip
options
utilities
Main menu
(Ex.)
Sub menu
brightness 25
-
+
contrast 50
- +
H position 50
- +
V position 50
- +
phase 15
1056
- +
frequency
-
+
scaling Wide
(Picture Menu)
Adjustment for computer screen
• To select another item on the Sub menu, press the [MENU] button.
Adjustment or Setting
For each item selected, the adjustment/setting has been made by pressing the
[
] and/or [ ] button. This monitor saves adjusted value at intervals of about 5
seconds. Do not turn off the monitor for at the least 5 seconds after adjustment or
setting.
(The detail steps for each item are described in the page 18-49)
5
picture
advanced
pip
adv pip
options
utilities
Main menu
(Ex.)
Sub menu
brightness 25
- +
contrast 50
- +
H position 50
- +
V position 50
- +
phase 15
- +
1056 frequency
- +
scaling Wide
Select the item to be adjusted on the Main Menu
Select the item to be adjusted by moving the cursor on the Main menu with the
[
] and/or [ ] button and then press the [ENTER] button. You can see the
cursor moving to the Sub menu.
Select the item to be adjusted on the Sub Menu
Select the item to be adjusted by moving the cursor on the Sub menu with the
[
] and/or [ ] button and then press the [ENTER] button.
• The selected item turns blue and then it is possible to control the item.
3
4
In case that Composite Video, S-Video and Component Video cables are
connected, each adjustment procedure needs to be done for Composite Video,
S-Video and Component Video, separately.
NOTE