Adjusting the Picture
Adjusting the picture
To adjust the picture:
1
Press
6
5
to highlight an option, press
3
4
to adjust the option;
If a sub-menu exits, press
4
or
OK
to access. You can select:
Press
MENU
. The on-screen menu opens with the
PICTURE
menu displayed, then press
6
to access.
!
!
!
!
!
!
!
!
!
)
!
!
(D-SUB,HDMI, USB-Movie only)
!
!
!
Picture Mode
— Selects the picture mode. You can select:
. Dynamic
(a bright and vivid picture,
recommended for store use. When the TV is powered on in this picture mode, a reminder
appears)
. Standard
(a standard picture)
. Soft
(a soft picture)
. User
(user customized picture).
Note:
You can also press
P.MODE
to select the picture mode.
Contrast
— Adjusts the contrast.
Brightness
— Adjusts the brightness.
Colour
— Adjusts the colour saturation.
Sharpness
— Adjusts the sharpness.
Tint
— Adjusts the image tint. (Only for NTSC system)
Backlight
— Sets the overall brilliance of the screen.
Colour Temperature
— Selects the colour temperature. You can select
Warm
(to enhance the reds),
Cool
(to
enhance the blues), or
Normal
.
Aspect Ratio
— Selects the aspect ratio of the picture. You can select:
. 16:9
— Shows a full-screen picture in 16:9 mode.
. 4:3
— Shows picture in 4:3 display mode. (Recommended not let TV remain in this mode for extended period of
time as to protect the screen.)
.
Auto
— Selects the correct aspect ratio automatically. (
Note:
In Component mode, due to technology limited, for
480i/p,576i/p "16:9" signal, please select "16:9" aspect ratio manually
. Zoom1
— Enlarges the picture vertically. The top and bottom may be cropped.
.
Zoom2
— Enlarges picture both horizontally and vertically. The edges may be cropped.
.
1:1 pixel mapping
(D-SUB, HDMI, Component only)
— Displays an input source without scaling it (This option is
available when native resolution is 1920x1080 and input resolution is 1920 x 1080p)
Note:
You can also press
ZOOM
to select the aspect ratio.
Noise Reduction
— Selects the noise reduction mode to reduce picture noise (snow). You can select
Low, Middle,
High,
or
Off
.
Overscan
— Turn this
On
to adjust the picture’s reproduction rate (available
when the input signal is in video format).
Adaptive Contrast
— Turn this
On
to optimize the picture display for a more vivid image.
HDMI Black Level
(HDMI only) — Selects the black level on the screen. Select
Low
for darker screen,
Normal
for brighter screen. (Available when RGB signal is input through HDMI jack).
Screen
(D-SUB only) — Adjusts the computer image.
2
Press
the
FREEZE
button
to
freeze
the
image
on
the
screen
(
the
video
sources
still
run
).
Press
again
to
restore
.
Freezing the picture
Note
:
!
,
remain
visible
.
Therefore do not freeze the picture for a long time.
!
In some mode, the FREEZE function can not work.
If a fixed image is displayed on the screen for a long time that fixed image may become imprinted on the screen and
21
Picture Mode
User
Contrast
75
Brightness
45
Sharpness
50
Colour
50
Tint
50
PICTURE
SOUND
TIME
OPTION
LOCK
CHANNEL
Select
Move
MENU
Return
Summary of Contents for LCD-46XR11F
Page 40: ...5944039750 Ver 1 0 ...
