Sanyo LCD-32XR56DZ, Service Manual

Page: 11 / 44

3.6
HDMI
port
Input
HDMI
signal from signal generator
VG-849
with the formats as
Table 4
and
Table 5
respectively, check if the display and the sound
（
32 KHz
、
44.1 KHz
、
48 KHz
）
are normal under
the circumstances of power-on/off, switching channel, switching signal format, etc.
3.7 Other functions check
a) Check if the functions are normal —timing turn-on/off
、
turn-off of sleeping time
、
picture/sound mode
、
OSD
、
stereo and digital audio interface, etc.;
b) Check if audio only digital programs (
RADIO
) are normal;
c) For
UK
models, check if
MHEG
function of digital programs are normal;
d) Check if common interface
（
CI
：
Common Interface
）
is normal;
e) For
New Zealand
models, check if function of logic channel number (
LCN
) is normal, check
if function of
Over Air Download
（
OAD
）
is normal;
f) For
France
,
UK
and
Italy
models, check if function of logic channel number (
LCN
) is
normal.
4 User menu setup before leaving factory
Enter into page
“LOCK
” of user menu, select submenu item “
Restore Factory Default
” to preset
items before leaving factory as below:
a) Clear out all programs information;
b) Clear out information of parental control (
VCHIP
);
c) Default setup of user analog data;
d) Set Menu Language as
English
;
e) Set Power on MODE as
Off
.
5
Instruction of factory software burning as
Table 6
Table 6
Instruction of factory software burning
No. Part No. Part type
Instruction of
software
function
Burned
before
SMT
Burning method
N111 5276405001 MX25L6405DMI-12G FLASH Yes
burned with program
ALL100
, write-protect setup,
refer to
Note 1
in detail
N108 5272404002 AT24C04 HDMI KEY Yes burned with program
ALL100
NA04 5272402002 AT24C02 HDMI EDID Yes burned with program
ALL100
NA05 5272402002 AT24C02 HDMI EDID Yes burned with program
ALL100
NA06 5272402002 AT24C02
HDMI EDID
(supporting
the3rd HDMI)
Yes burned with program
ALL100
N106 5272402002 AT24C02 VGA EDID Yes burned with program
ALL100
Note 1:
Write-protect setup method
Enter into burning interface of
program
ALL-100
, select item “
Config
”, press item “
config
Setting”
, set item “
Protect
” as “
All Protect
”; be sure to select item “
Config
” before burning
software, and write-protect must be re-set after burning program
ALL-100
startup every time.