Memorizing the Channels & Setting the Channels
When you turn on the TV for the first time, you should perform an auto channel scan to set up stations on your TV.
Note
:
Be
sure
to
select
the
TV
input source
before
operation
.
Auto Channel Scan
You should perform an auto channel scan to search for all channels
available and stores them in memory.
96.75MHz
Exit
Channel Scan
Total Channel
4
To auto scan for channels:
1
Go
to
CHANNEL
menu.
2
Press
6
or
5
to highlight
Auto Scan
, then press
ENTER
.
The TV begins scanning for available channels in your area and stores
them into memory. This may take several minutes, please wait.
During the process, you may press
EXIT
to stop the auto scan, but
you will need to run the auto scan again to set up stations on your TV.
Auto/Manual fine tuning
To auto or manual fine tune the programs
2
3
Press
6
or
5
to highlight
Channel Edit
, then press
ENTER
.
4
Press
6
or
5
to highlight
FineTune
, then use
3
or
4
to manually
fine tune until the best possible picture and sound are achieved.
Or you can turn
AFC
function to
ON
to automatically fine tune the
program.
In
Channel Edit
sub-menu, highlight
AFC
and press
4
, use
6
or
5
to select
ON
and then press
ENTER
.
If you perform manual fine tuning, the AFC function will be turned off
automatically.
5
1
Select a channel you want to perform fine tuning.
0
CHANNEL
Skip Channel
FineTune
AFC
Fav CH
OFF
OFF
OFF
Move
Adjust
Return
Fine Tuning is not necessary under normal conditions. However, in area
of inferior broadcast conditions where adjustment is necessary for a
better picture and sound, use fine tuning (auto or manual fine tuning) .
Go to
CHANNEL
menu.
6
To return to previous menu, press
MENU
. To close the menu, press
EXIT
button.
Setting the AIR/CABLE option
To set the AIR/CABLE option:
1
Press
MENU
. The on-screen menu opens.
Press
6
or
5
to display
CHANNEL
menu, then press
ENTER
.
2
Before your TV can memorize the available channels, you must specify
the type of signal source that is connected to the unit. (i.e., an antenna or
cable system)
Highlight
AIR/CABLE
, then press
ENTER
.
3
Press
6
or
5
to select
AIR
or
CABLE
, then press
ENTER
.
Select CABLE if using Cable TV, select AIR if using VHF/UHF antenna.
4
To exit, press
EXIT
button.
5
MTS
Auto Scan
Channel Edit
AIR/CABLE
CABLE
MONO
CHANNEL
Move
Enter
MTS
Auto Scan
Channel Edit
AIR/CABLE
CABLE
MONO
CHANNEL
Move
OK
MTS
Auto Scan
Channel Edit
AIR/CABLE
CABLE
MONO
CHANNEL
Move
Enter
14
AIR
CABLE
Return
Return
Return
Color System
AUTO
Color System
AUTO
Color System
AUTO