Sanyo LCD-32K30TD Owner'S Manual Download Page 41

Page: 41 / 52

SCREEN SETUP FOR PC MODE

PC SETUP

Press ◄ or ► button to select

Picture

menu, Press

▼

button to access the menu.

Press MENU button and the main men screen displays.

Before adjusting the screen, make sure that you select the correct source (PC).

Option

Description

Auto Adjust

The LCD TV automatically adjusts the image settings, such as position

and phase.

To move the image on the screen left or right.

H-Position

To move the image on the screen up or down.

V-Position

Adjust the horizontal width of the image on the screen

Size

Improve the focusing of a stable image.

Phase

Within the menu, press

▲

▼

to scroll through the page upward or downward until you select

PC Setup

, then press

► or OK button to access.

Press BACK button to return to previous menu. Press MENU button or no operation for a few

seconds (the duration can be set) to exit the menu screen directly.

Press

▲,

▼, ◄ or ► button to navigate through the options and adjust the options. To confirm,

press OK button.

LCD-K30TD_(SEI).indd 41

4/22/2009 3:15:18 PM

Summary of Contents for LCD-32K30TD





















































Search results

Summary of Contents for LCD-32K30TD

Reviews:

Related manuals for LCD-32K30TD

Brands by name

Popular brands

Sanyo LCD-32K30TD, Owner'S Manual

Search results

Summary of Contents for LCD-32K30TD

Reviews:

Related manuals for LCD-32K30TD

Brands by name

Popular brands