7
7
Plug & Play
By PLUG & PLAY, when the TV set is powered on for the first time, it will automatically search and
preset all the receivable TV positions.
1
1
Plug the power, connect the antenna, and press the MAINS ON/OFF button on the control panel, the
TV set will automatically search the positions.
I AM SEARCHING ALL
PROGRAMMES,PLEASE WAIT
3
AUTO SET-UP
COMPLETED.
HAPPY VIEWING !
1
2
2
About 10 seconds after automatic search, it will be returned to normal TV status.
■
If no position is found, the TV set will show the message below. Check if the antenna is properly
connected.
NO STATION.
PLEASE CONNECT
ANTENNA PLUG.
After disconnecting the main power and connecting the antenna properly, turn on the TV set again.
It will automatically search the positions from the beginning.
Caution to dealers!
This function comes only when the TV set is powered on for the first time.To restore this function
before this product is delivered to customer, proceed the operation as described below.
1
1
Hold the TV/AV button on the control panel for more than 2 seconds. The message
MEMORY CLEAR" will appear on the screen.
2
2
Press the MENU button on the control panel while the message "MEMORY CLEAR" appearing on
the screen.(less than 5 seconds.) And then the display of "CLEARING xx%" will be on. When it is
appearing "MEMORY CLEARED", the message will disappear. And now, the PLUG & PLAY function
is restored.
NOTE:
When you are proceeding the operations above, the settings of VOLUME LOCK, TUNING LOCK,
PRIVATE POSITIONS and SKIP CHANNELS will be canceled. And the PERSONAL in the VIDEO
setting will reset to factory settings.
Inst. Manual N2JV 6/8/04 2:24 PM Page 7
