Sanyo HVR-DX625 Instruction Manual Download | Manualshive

Page: 18 / 61

background image

12

Connections

Choose one of the following TV connections, depending on the capabilities of your equipment.

RF Connection

Connect the RF OUT (TO TV) jack on the DVD RVCR to the antenna in jack on your TV using the supplied
75-ohm RF cable (R). If you use this connection, tune your TV to the DVD RVCR's RF output channel (CH
36 for Australia, CH 35 for NewZealand).

Audio/Video Connection
1

Connect the VIDEO OUT jack on the DVD
RVCR to the video in jack on your TV using
the supplied video cable (V).

2

Connect the Left and Right AUDIO OUT jacks from
the DVD RVCR to the left/right audio in jacks
on your TV using the supplied audio cables (A).

S-Video Connection
1

Connect the S-VIDEO OUT jack on the DVD
RVCR to the S-Video in jack on your TV using
an S-Video cable (S).

2

Connect the Left and Right AUDIO OUT jacks from the DVD
RVCR to the left/right audio in jacks on your TV using the supplied audio cables.

Component Video Connection
1

Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD RVCR to the corresponding
input jacks on your TV using a Y Pb Pr cable (C) if the Component Video jacks (Y, Pb, Pr) are available on
your TV.

2

Connect the Left and Right AUDIO OUT jacks from the DVD RVCR to the left/right audio in jacks on
your TV using the supplied audio cables.

Progressive Scan Connection

• If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the DVD

RVCR’s Progressive Scan output for the highest video resolution possible.

• If your TV does not accept the Progressive Scan format, the picture will appear scrambled.

1

Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD RVCR to the corresponding
in jacks on your TV using an optional Y Pb Pr cable (C).

2

Connect the Left and Right AUDIO OUT jacks from the DVD RVCR to the left/right audio in jacks on
your TV using the supplied audio cables.

Connecting a TV

• Be sure to set the DVD RVCR to Progressive Scan mode by pressing and holding [P.SCAN] for 3 seconds

(or changing the Video Output in the Setup Menu; see page 22).

• Progressive Scan does not work with the RF, Audio/Video or S-Video connections.

ANTENNA

INPUT

Y

Pb

Pr

COMPONENT/PROGRESSIVE VIDEO INPUT

S-VIDEO

INPUT

R

S

C

L

R

AUDIO INPUT

VIDEO

INPUT

A

V

Rear of DVD RVCR

Rear of TV

DF-Q77E2D-HR-O 2006.6.21 3:57 PM ˘

` 12 mac001 1200DPI 90LPI

Downloaded from

www.Manualslib.com

manuals search engine

Downloaded From Disc-Player.com Daewoo Manuals

«
...
16
17
18
19
20
...
»

Summary of Contents for HVR-DX625






























































Reviews:

No comments

Related manuals for HVR-DX625

PVDM2792 - MONITOR/DVD COMBO

Brand: Panasonic Pages: 80

Scenium D34W135D

Brand: RCA Pages: 2

Brand: RCA Pages: 64

Brand: RCA Pages: 36

Brand: RCA Pages: 42

Brand: RCA Pages: 56

X23/39C-FTCD-UK

Brand: UMC Pages: 34

Brand: Magnavox Pages: 48

Brand: Panasonic Pages: 40

20MC4206 - Tv/dvd Combination

Brand: Magnavox Pages: 2

19MDTR20 - Dvd-video Player

Brand: Magnavox Pages: 80

FPE3207DV - 32" LCD TV

Brand: Audiovox Pages: 31

Brand: Samsung Pages: 36

Brand: Tevion Pages: 36

M26-28E-GB-TCDUP-UK

Brand: Tevion Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands