Sanyo HEC-DR8700 Instruction Manual Download

Page: 25 / 36

Adjust the height, width, speed, and strength of the massaging rollers.

Finishes massaging automatically by timer operation.

ROLLER MASSAGE buttons (for upper body)

Press the desired ROLLER MASSAGING button.

●

Refer to pages 25-26 for details of the contents

of massage.
For spine stretching (full), the shoulder position

is first measured. When the position of shoulder

is not correct, adjust the position of massaging

rollers. (See page 19)
During massaging operation, the operation can be

changed to other manual massage, Whole Body

Sensor Automatic Course or Automatic Courses.
It is possible to operate the upper body massage

and lower body massage simultaneously.

There are some adjustments which are not possible, depending on the type of massage chosen.

■

If a different course button (manual) is pressed during

the course of operation, the massage will be completed

by operation of the timer approx. 30 minutes after starting

the massage selected first.

The massaging rollers are moved to the upper position

and are stopped automatically approx. 15 minutes after

starting the operation. The beep sounds and the lamp

on the remote control will turn off.

The massaging

rollers are moved

to the upper

position and are

stopped.

[at the origin]

Adjusting the height of massaging rollers.

Press the button.

The massaging rollers will move up

if the UP ( ) button is pressed

continuously and move down if

the DOWN( ) button is pressed

continuously.

●

The approximate position of the

massaging rollers is indicated by

the lamp on the remote control.

The strength of the

massage will change

each time the button

is pressed, and is

indicated by the lamp

on the remote control.

(in five stages)

Adjusting the strength of roller massaging.

The width of the

massaging rollers will

change each time the

button is pressed and is

indicated by the lamp

on the remote control.

(in five stages)

Adjusting the width of the massaging rollers.

Adjusting the movement speed of massaging rollers.

The speed of the

massaging rollers will

change each time the
button is pressed, and
is indicated by the lamp
on the remote control.
(in five stages)

(See page 25-26)

Summary of Contents for HEC-DR8700





































Search results

Summary of Contents for HEC-DR8700

Reviews:

Related manuals for HEC-DR8700

Brands by name

Popular brands

Sanyo HEC-DR8700, Instruction Manual

Search results

Summary of Contents for HEC-DR8700

Reviews:

Related manuals for HEC-DR8700

Brands by name

Popular brands