1. With reclining "ERECT" and "RECLINE" on remote controller held depressed,
turn ON power supply switch.
2. Red LEDs (41 places) go on for 1 second (Fig. 1).
3. Green LEDs (25 places) go on for 1 second (Fig. 2).
4. Red LEDs at five places in the massage mode go on and operation of each sensor can be checked (Fig. 3).
Operation Check of Each Sensor
Body contour sensor Press in the upper part of massaging arm.
Speed "FAST" LED which is lighted goes out.
Perspiration sensor When a finger is placed between two electrodes,
LED "Put your finger on the sensor" which is lighted goes out.
Skin temperature sensor
When temperature is about 17 or lower, LED "Ease" goes on.
When temperature is over about 17 , LED "Ease" goes out.
Pulse sensor Attach a finger to sensor by the side.
LED "Recovery from fatigue" blinks.
リクライニング
Red's lighting-up
Skin temperature/Pulse sensor
Perspiration sensor
ＬＥＤ
Skin temperature sensor
ＬＥＤ
Red's lighting-up
Red's lighting-up
Presses
Red's lighting-up
Red's lighting-up
Red's lighting-up
Red's lighting-up
Green's lighting-up
Green's lighting-up
Green's lighting-up
Green's lighting-up
Green's lighting-up
Green's lighting-up
Perspiration sensor electrodes
Pulse sensor
ＬＥＤ
Body contour sensor
ＬＥＤ
Red LEDs go on for 1 second (Fig. 1)
(Fig. 3)
Green LEDs go on for 1 second (Fig. 2)
- 12 -
Operation Check of
Remote Controller and Sensor
HEC-DR21
(TAIWAN)
