Sanyo FXD-RR1, Operating Instructions Manual

Page: 9 / 27

GB–8
• Sub disp
You can adjust with which priority items are to be displayed in the Sub display. Display priority can be
set for the following 2 items ;
Mode : Mode indication (FM/AM/CD etc,.).
Clock : Clock indication.
•Disp speed (Display speed)
The scroll speed of the display indication can be switched.
Fast : Fast.
Slow : Slow.
•Scroll type (Display type)
The scroll type of the display indication can be switched.
With pauses
: Scrolls across the display with pause.
Rolling : Scrolls across the display.
• LV Meter(Level Meter)
The sensitivity of the level meter display can be switched.
0 : No meter is indicated.
1 : The level meter goes upward/downward.
2 : The level meter goes up dividing from the center segment.
3 : Only the very top segment light.
4 : The remaining segments light. (Opposite of 3)
• LV Sens (Level sens)
The sensitivity of the level meter display can be switched.
Lo : Normal sensitivity.
Hi : High sensitivity.
• Contrast
The contrast of the display can be adjusted.
+3 ~ 0 ~ –3
• Illumi.
Select the illumination status when the power is off.
off : Only the power button will light up.
on : All buttons will light up.
• Message
Turn on/off message can be switched.
on : A message is displayed when power on/off.
off : No message is diplayed.
• Clock adj.
Adjust the clock. (See page 5)
• Standby Time
Select the length of time until the sound will go out after opening the front panel.
min : Sound will not go out.
0sec : Sound will go out immediately.
15sec : Sound will go out after 15 seconds.
30sec : Sound will go out after 30 seconds.
1min : Sound will go out after 1 minute.
3min : Sound will go out after 3 minute.
10min : Sound will go out after 10 minute.
• Demo
The demonstration of each function is repeatedly shown on the display screen. The demonstration
starts about few seconds after power off.
on : The demonstration is displayed after power off.
off
: The demonstration is not displayed after power off.