-25-
ERROR SIGNS
CD Player
If a problem should occur while operating the built-in CD player, one of the following error signs
may be displayed:
CD Changer
If a problem should occur while operating the connected CD changer, one of the following error signs may
be displayed.
Abnormal CD mechanism function.
Internal connection check error.
Contact the place of purchase.
No disc in the player.
Insert the disc.
Press the eject button.
Turn the power off and then on again.
If it is not corrected, contact the place
of purchase.
The disc is dirty.
CD is inserted upside down.
Clean the disc.
Insert the CD properly.
Error Sign
E01
E07
E99
NO CD
Cause
Remedy
Error Sign
E01
E07
E30
NO CD
NO CDC
Cause
Remedy
Abnormal mechanism function
The disc was inserted incorrectly.
The disc is dirty.
The disc is defective.
There is condensation on the
optical lens.
Excessive temperature has been
detected in the vehicle.
No discs in the magazine.
The connector is connected
incorrectly.
Contact the place of purchase.
Insert the disc properly.
Clean the disc.
Use another disc.
Leave the disc player off for an hour
or so, then try again.
Refer to the instructions supplied with
the CD changer.
Allow the car to cool.
Load discs into the magazine.
Connect the connector correctly and
securely until it clicks.
Abnormal amplifier.
Check the speaker line code.
Error Sign
E10
Cause
Remedy
