Sanyo FXD-MP690, Service Manual

Page: 11 / 50

10
STORING PRESET STATIONS .................................5
The preset buttons 5 can be used to store 6 stations in each band (FM 1, FM 2, FM 3 and MW, LW) for convenient
access to your favorite stations.
•
Programming stations ..... 1. Select the desired band, then tune in the station you want to store in memory.
2. Press and hold one of the preset buttons 5 for more than 2 seconds until the
corresponding preset button number appears. Repeat steps 1. and 2. to program
additional stations.
•Quick tuning .................... Select the desired band, then press one of the six preset buttons 5.
LOCAL/DISTANT SELECTION ...........................…..6
Press LOC button 6 to set local or distant stations.
Use local position (LOCAL/LOC appear on the display) for reception of strong station, and distant position (DX
appears on the display) for reception of weaker stations. This function is effective during AUTO SEEK operation.
FREQUENCY SCAN OPERATION.......................….7
Press SCAN button 7 to set the function to frequency scan mode, which scans stations and stop for several
seconds at each receivable signal. Press SCAN button 7 again to stop