7
ADJUSTING THE SOUND STAGE .............................6
You can adjust the position of sound stage to best serve a particular seat.
TO MEMORY THE SOUND STAGE ................................................... 6
1.
Adjust the BALANCE or FADER.
2.
Press the appropriate Preset buttons 6 for more than 2 seconds. The Audio position indicator blinks
and adjusted sound stage is stored.
TO CALL THE SOUND STAGE ......................................................... 6
Press the appropriate Preset buttons 6 to call the desired sound stage during the BALANCE or FADER
adjustment mode. The Preset buttons are factory-set to the following conditions.
BALANCE
FADER
P 1
1
: For the left seat
(
L
0
R
2 )
(
R
4
F
0 )
P 2
2
: For the front seat
(
L
0
R
0 )
(
R
4
F
0 )
P 3
3
: For the right seat
(
L
2
R
0 )
(
R
4
F
0 )
P 4
4/SHF
: For the rear seat
(
L
0
R
0 )
(
R
0
F
4 )
P 5
5/RPT
: For all the seat
(
L
0
R
0 )
(
R
0
F
0 )
Each time you press the preset buttons in the BALANCE or FADER adjustment mode, the audio position
indicator changes as follows ;
1
2
3
4/SHF
5/RPT
SWITCHING THE DISPLAY ........................................3
Each time you press the DISP button 3, the display window will change as shown below ;
• Radio mode
Frequency and Clock
• CD mode
Elapsed track time and Clock
IGNITION-OFF CLOCK RECALL .............................3
Press the DISP button 3 while the ignition switch is in the “OFF” position.
The display will illuminate showing the time and then automatically shut off after 5 seconds.
FXD-780GD_Ebody
03/04/2002, 04:45 pm
7
