Sanyo EM-C1901 Operating Instructions Manual Download Page 11

10

MuLtI-QuANtIty COOKINg

Using multiple quantity buttons with memory program, you can heat 2 or 3 dishes at the same time.

To heat two frozen dishes by using program No.3.

Example:

•  Tr

iple quantity can be done by pressing MULTIPLE QUANTITY SELECTION key twice.

•  To select the program number from 11 to 20, press PLUS 10 key between steps 2 and 3. 

Please see the page 8 “when choosing the program number from 11 to 20” in detail.

• 

Cooking time for double quantity

  The cooking time for double quantity is 

1.6

 times the cooking time for ordinary quantity.

• 

Cooking time for triple quantity

  The cooking time for triple quantity is 

2.1

 times the  

cooking time for ordinary quantity.

• 

Maximum input time for multi-quantity cooking

  When more than “Power Level 6” is being used, its  

max. heating time is 

12

 minutes. When less than  

“Power Level 5” is being used, its max. heating  

time is 60 minutes.

Note:

MEMORy RECALL

To recall setting of program No.3. (When it is programmed as 1st stage 30 seconds on maximum power, 2nd stage  
1 minute at power level 5 and 3rd stage 2 minutes at power level 2)

Example:

•  Press CLEAR key after recall.

•  If nothing is in the memory, the program number indicator will flash.

•  You can change the program by operating same procedure as programming for memory cooking on page 8.

•  To select the program number from 11 to 20, press PLUS 10 key between steps 1 and 2.  

Please see the page 8 “When choosing the program number from 11 to 20” in detail.

Note:

KEy

OpERAtION

DIspLAy WINDOW

1

•  Place food in suitable containers on the ceramic tray in the 

oven and close the door.

2

•  Press DOUBLE QUANTITY key.
•  “2” appears in the display.

3

•  Press “3”, then heating starts automatically.
•  Program number is displayed.
•  Total heating time will show and count down.

4

•  Cooking time ends.
•  Remove the food from oven after “beep” tone sounds.

KEy

OpERAtION

DIspLAy WINDOW

1

•  Open the door.

2

•  Press 3.
•  Program number is displayed.
•  Shows 30 seconds on maximum power for 1st stage.

3

•  Press 3 again.
•  Shows 1 minute at power level 5 for 2nd stage.

4

•  Press 3 again.
•  Shows 2 minutes at power level 2 for 3rd stage.

5

•  Press CLEAR key.

Maximum input time

pOWER 

LEVEL

Double quantity

triple quantity

Maximum 

input time

Heating time

Miximum 

input time

Heating time

Max.~6

6 min 00 sec

9 min 36 sec

5 min 43 sec

12 min 00 sec

5~0

30 min 00 sec 48 min 00 sec 28 min 35 sec 60 min 00 sec

Summary of Contents for EM-C1901

















Reviews: