Sanyo EM-C1100SD, Service Manual

Page: 16 / 28

-15-
Maintenance:
The microwave are designed, manufactured, and tested for years of depentable operetion. However, the
oven may require service from time to time if the consumable components listed below are not replaced
at the apporopriate time. for protection from unexpected service calls and undue inconvenience, we recommend
that the user has the listed parts replaced at the intervals below, (at custmer cost).
this will avoid the trouble of repeated service calls after the expiration of the warranty period.
Consumable components:
When more than 1,250 hours of accumulative cooking time or more than 200,000 cycles of door opening/
closing is observed by key operations (See page 13 for more information), the following consumable
components should be replaced.
(Maintenance light in window display indicates when accumulative cooking time reaches 1,250 hours.)
Light
1. Magnetron Tube, Part No. 415 002 6804
2. Printed circuit board, Part No. 617 229 7842
3. Switch base Assembly, 617 231 0213
This consist of parts listed on the Main body parts Key No. 25 thru No.34 .
4. Door latch, Part No. 617 068 1087
When more than 2,000 hours of accumlative cooking time is observed, the following consumable components
should be replaced.
5. Blower motor, Part No. 617 232 4692
When slow rotating of blower motor isobserved after dust from blower motor, blower motor must be
replaced.
6. Door hinge, Part No. 617 120 3028
When worn door hinge is observed and proper door adjustments can not be made, the door hinge must
be replaced.T