-15-
CLOCK
DISPLAY MODE CHANGE
......................................... 1
The display on the unit can be changed by pressing CLK button
. Press the CLK button
to switch
between the clock and audio display. When a radio, tape and CD function is performed while the time display
is selected, the audio display will appear for 5 seconds, then the display will return to the time mode.
ADJUSTING THE TIME
.............................................. 1, 2, 3
To adjust the time, press the CLK button
for more than 2 seconds. The time display blinks.
To adjust the minute, press the
button
.
To adjust the hour, press the
button
.
To advance the time rapidly, hold the
or
button continuously.
Press CLK button
again to start the clock.
CLOCK RESET
......................................................... 1, 4
Press CLK button
for more than 2 seconds and the time display blinks. While blinking, press preset
button 6
to skip to the nearest half-hour as follows:
Example: 3:00
–
3:29
3:00
3:30
–
3:59
4:00
4 1
2
3
• This unit uses a 12-hour clock.
• The clock function and radio presets are retained in memory when the audio is switched off.
Notes
ECD-T1820_E.fm Page 15 Tuesday, December 14, 2004 8:33 AM
