-E57-
Need help? Call
1-800-813-3435
LISTENING TO THE RADIO
To turn the unit on and listen to the last received station, press
[AM/FM] on the remote control.
Automatic/Manual Tuning
1. Press [AM/FM] to select FM or AM.
2. Automatic tuning
Press [TUNE] + or – for at least 1 second to tune in a station.
The unit will scan up or down the band and receive the next
receivable station. Press the button again to continue.
Manual tuning
Press [TUNE] + or – briefly until the desired frequency is
displayed. The frequency changes in 200 kHz steps for FM
and 10 kHz steps for AM.
To Preset Stations
Up to 24 FM and 12 AM stations can be preset.
Automatic presetting (APT)
1. Press [AM/FM] to select FM or AM.
2. Press [SETUP/MENU] for at least 3 seconds.
“– –” and “FM (or AM)” blink.
The automatic tuning mode is set and automatic presetting
begins from the low end of the band.
When 24 FM or 12 AM stations have been preset or the high
end of the band is reached, automatic presetting stops.
“– –” disappears and the station memorized on channel 1 will
be heard.
Note:
If APT is activated, all previously programmed stations of the
band will be cleared and new stations will be programmed.
1
2
1
2
