22
Operation with tape (Continued)
Normal Recording
Preparation:
Turn on the power of both the DVD+VCR and TV.
Tune the TV to the DVD+VCR output channel (CH 3 or 4) or
set the TV’s source selector to VIDEO.
If a direct VIDEO/AUDIO connection is made between the
DVD+VCR and the TV, set the TV’s source selector to
VIDEO.
11
Insert a video cassette that the safety tab intact.
22
Select the desired channel by using CH/TRK
(
v
v
/
V
V
).
If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select the
LINE1 or LINE2 by pressing
INPUT
.
33
Set the desired recording speed (SP or SLP) by
pressing SP/SLP.
This DVD+VCR is not designed to record in LP mode.
44
Press REC (
z
z
) once.
Recording will start. (The REC indicator will light in
the display window.)
REC indicator appears only when the Output Source is
set to VCR.
If a cassette with no safety tab is loaded, the cassette
will be ejected automatically.
55
Press STOP (
x
x
) to stop recording.
If the tape reaches the end before STOP (
x
) is pressed,
the DVD+VCR will automatically stop, rewind, eject, and it
will turn itself off (Only when no disc).
To pause the recording
1
Press PAUSE/STEP (
X
) to pause the tape during
recording.
The REC indicator will flash in the display window.
2
When you want to continue recording, press
PAUSE/STEP (
X
) or press REC (
z
z
).
After 5 minutes in pause mode, the tape will be stopped
automatically to protect the tape and the video heads.
To record one TV program while
watching another
1
Press TV/VCR to select the TV mode during record-
ing.
The TV indicator appears.
2
Using the TV, select the channel to be viewed.
ips
Always use PAUSE/STEP (
X
) for the best results when mak-
ing changes during recording.
For example: To change channels during recording, first press
PAUSE/STEP (
X
) to put the unit in pause mode. Then select
the desired channel on the DVD+VCR, and press
PAUSE/STEP (
X
) again to resume recording.
Timer Recording
This DVD+VCR can be programmed to record up to 8
programs within a period of 1 year. For unattended
recording, the timer needs to know the channels to be
recorded and the starting and ending times.
Preparation:
Turn on the power of both the DVD+VCR and the TV.
Be sure the TV is set to the DVD+VCR output channel (3 or 4).
Make sure the TUNING BAND in the TUNING menu is set
appropriately (TV or CATV).
11
Press MENU and the MAIN menu will appear.
22
Use
v
v
/
V
V
to choose the PROGRAM menu.
33
Press SELECT/ENTER ( ) to go to the
PROGRAM menu.
The PROGRAM menu will appear.
If all programs have already been entered, FULLY
PROGRAMMED message will appear for a moment
and then PROGRAM 1 will appear on the TV screen.
44
Use
b
b
/
B
B
to choose the PROGRAM No. (1-8).
55
Use
V
V
to choose the MONTH option.
Use
b
b
/
B
B
to choose the desired month.
66
Use
V
V
to choose the DAY option.
Use
b
b
/
B
B
to choose the desired day.
77
Use
V
V
to choose the START option.
Use
b
b
/
B
B
to choose the desired start time.
88
Use
V
V
to choose the STOP option.
Use
b
b
/
B
B
to choose the desired stop time.
99
Use
V
V
to choose the CHANNEL option.
Use
b
b
/
B
B
to choose the desired channel
(Channel, LINE1 or LINE2).
Cable Users:
If you have CABLE TV and used Cable Box
in Connecting Antenna/Cable TV to DVD+VCR (page 11),
using a cable box converter, you must set the channel in
this step to match the cable box output channel (usually
CH 3 or 4). Change channels on the cable box instead of
channels on the DVD+VCR.
If you try to set the program timer before setting the clock,
PLEASE SET THE CLOCK appears for a moment and
then CLOCK menu appears on the TV screen. Set the time
and date before proceeding.
Make sure a tape is in the DVD+VCR and the safety tab is
in place or the tape will be automatically ejected.
Things to know before starting