RECORDING USING AN EXTERNAL TIMER
INPUT
Recording can be controlled by an external start/stop
signal input at the EXT TIMER IN terminal.
Example 3:
To record using the signal input at the
EXT TIMER IN terminal, in L24-hour
mode.
œ
Follow the Before starting steps, under “NORMAL
RECORDING”.
NOTE:
œ
External timer input recording can only be set on the
9th line (EXT) of the (TIMER SET) menu.
1
Press the MENU button to display the (MAIN MENU
1) menu.
2
Press the SHIFT
]
button to select the “7. TIMER
SET” line, then press the MENU button.
ø
The (TIMER SET) menu appears.
3
Press the SHIFT
]
,
\
,
+
or
*
button, until the “SPD”
(recording speed) position of the “EXT” line starts
flashing.
4
Press the DATA
l
(or
j
) button to select the
recording speed mode (ex: L24), then press the
SHIFT
*
button.
ø
“N” will start flashing.
5
Press the DATA
l
(or
j
) button to select “Y”.
@@@@@@<TIMER@SET>
WEEK@START@@STOP@@@SPD
SUN@@--:--@@--:--@----@N
MON@@--:--@@--:--@----@N
TUE@@--:--@@--:--@----@N
WED@@--:--@@--:--@----@N
THU@@--:--@@--:--@----@N
FRI@@--:--@@--:--@----@N
SAT@@--:--@@--:--@----@N
DLY@@--:--@@--:--@----@N
EXT@@*****@@*****@@L24@Y
6
Follow steps
G
and
H
under “PROGRAM TIMER
RECORDING on page 31”.
ø
When an external signal is input, “E” will light on
the digital display and recording will take place.
NOTES:
œ
Other timer recordings using the standard procedure
can also be programmed.
œ
The external input signal must be input at the EXT
TIMER IN terminal.
RD2QD/NA (DTL-4800 GB) Tue. Aug., 08/2000
English
35
