GENERAL SET
4
82
English
SETTINGS
z
To set a 4-digit password
Turn the shuttle dial clockwise when “-” for the fifth
character is flashing.
7
Following this, turn the shuttle dial
clockwise.
The cursor moves to “OFF” (flashing).
8
Turn the jog dial to select “ON”.
z
If you select “OFF” for the “ADMIN” setting, you cannot
set the “USER” password.
9
Turn the shuttle dial clockwise.
The cursor moves to “USER”.
If you do not want to set a user password, the
password setting procedure can now be ended.
Turn the jog dial to move the cursor to “REC
CONTROL” so that authorization for recording and
playback operations may be set.
Example: Setting “AB123456”
1
Turn the jog dial to move the cursor to
“USER”.
2
Turn the shuttle dial clockwise.
The first password entry bar “-” flashes.
Turn the jog dial to display “A”.
3
Turn the jog dial clockwise.
The second password entry bar “-” flashes.
Turn the jog dial to display “B”.
Use the same procedure as for the administrator
password to set “123456”.
4
Following this, turn the shuttle dial
clockwise.
The cursor moves to “OFF” (flashing).
5
Turn the jog dial to select “ON”, and
then turn the shuttle dial clockwise.
The cursor moves to “REC CONTROL”.
1
Turn the jog dial to move cursor to
“REC CONTROL”.
2
Turn the shuttle dial clockwise.
Turn the jog dial to select either “ADMIN” or “USER”, and
then turn the shuttle dial clockwise.
This completes the setting procedure.
Setting the user password
USER A------- OFF
Setting operation priority for recording and
playback
e00_l8hbe_xe_7.book Page 82 Monday, May 24, 2004 10:41 AM