– 8 –
ELECTROSTATICALLY SENSITIVE DEVICES
Many solid-state devices (especially Integrated Circuits) are Electrostatically Sensitive,
and, therefore, require special handling techniques as described under “Servicing
Electrostatically Sensitive Devices,” on page two in this service literature.
RC BOARD REMOVAL
Remove 1 screws (C:3x10) to take the RC BOARD off.
MOUNTING WALL REMOVAL
Remove 2 nuts (G) from the cabinet back
ATTENTION
– Confirm Mounting wall wire is installed when you install
the back cabinet.
– Need to use the hot-melt method to remove the mount-
ing wall, generally need not remove the mounting wall
through servicing.
MECHANICAL DISASSEMBLY (Continued)
