- 11 -
SERVICE MODE
4. Setting REGION code
4.1While a highlighted indicator is displayed on the right side
of the Region denotation, push ENT key or cursor right and
left keys on the remote controller .
Information area updates in the following order.
1<->2<->3<->4<->5<->6<->1
Notice : This instruction should be proceed only if it is
necessary.
Set up the region coder currently displayed on the rear
panel.
5. Setting Tuner Selection
5.1 While a highlighted indicator is displayed on the right
side of the Tuner Selection denotation , push cursor
right or left key on the remote controller . Information
area updates in the following order.
JP2<->US<->EU2<->SS<->JP/NX<->JP-TV/NX
<->EU<->SS/JP2<->JP2
Notice : This instruction should be proceed only if it is
necessary.
Tuner selection of this model is "EU2".
6. Setting RDS Availability
6.1While a highlighted indicator is displayed on the right
side of the RDS Availability denotation , push cursor
right or left key on the remotecontroller . Information
area updates in the following order.
None<->Exist
Notice : This instruction should be proceed only if it
is necessary.
(Reference figure)
(Reference figure)
(Reference figure)
3
(Sample)
The sample of a display of a region
code “3”.
