-7-
Service Adjustments with Replacing Memory IC(IC802)
Note: The CPU (IC201) and memory IC (IC802) store the service adjustments data and controls data for each
circuit.When the Memory IC(IC802) is replaced, some of the service adjustments should be readjusted to
obtain the best performance. The necessary service adjustments are carried out by using the RC handset.
Please set up the TV set with following steps [1] to [2].
[1] Initializing Procedure
1.
Put a new memory IC.
2.
Turn on the TV set.
3.
Press and hold the
TV/AV Selector
on the TV set for more than 2 seconds. The following picture appears on the
screen.
4.
Press the
MENU
on the TV set while the above On-Screen Display is still on the screen. The following picture
appears on the screen.
5.
Switch off the TV set by pressing the
Power Switch button
on the TV set while the above On-Screen Display is
still on the screen.
This completes the initialization of memory IC.
Following shows the initialized contents of memory data by this procedure.
- Plug & play
: No executed
- Inhibit data
: Cancelled
- Ch skip data
: Cancelled
- Sound volume data : 10/63 steps.
- Volume Lock
: OFF
- Colour system
: AUTO
CLR
CLR
Press and hold for more than 2 seconds
MENU
TV/AV
CH
- +
[2] Required Service Adjustments
Readjust the following service adjustments.
Adjustments
Service Mode No. & Item
RF AGC
Item 126, RF DELAY ADJ
Horizontal centre
Item 21, H-PHA (PAL)
Vertical Position
Item 16, V-SHIFT
Vertical linearity
Item 14, V-LIN
Vertical-S correction
Item 12, V-SCO
Gray scale
Item 187 ~ 191
Further adjustment please refer to page 15 and 16.
MENU
TV/AV
CH
- +
(displayed in yellow color)
(displayed in red color)
SM_21-BE6V (AC7-A)AUS 5/9/08 11:11 AM Page 7
Summary of Contents for CP21SE1K
Page 35: ... 35 ...
Page 36: ...SANYO Electric Co Ltd May 08 30 CPS Printed In Indonesia ...
