–
E4
–
Step 2: Register the Handset
YOU NEED TO REGISTER THE CLT-OHE40 TO A MAIN BASE BEFORE
USE!
1
Be sure the handset battery is fully charged.
2
With the main base in standby mode (i.e., not being used), place
the handset in the main base to begin registration.
For compatible models in the CLT-E23 and CLT-E30/32/33
series:
1)Disconnect the AC adapter.
2)While holding the
find handset
key, connect the AC Adapter:
Keep pressing the key until the
CHARGE
LED starts to blink.
3)On the handset, press and hold
#
until you hear beep.
3
H an d se t R e gi s te ri n g
will appear in the LCD. Once
R eg i st r at i on Co mp l et e
is displayed, the extra handset is
registered to the base. If
Re g is t ra ti o n Fa i le d
appears, please
try these steps again.
De-register the handset
1)Press and hold
END
and
#
for more than 5 seconds.
2)Select the handset ID to be de-registered from the list.
The phone will ask you to confirm the deregistration. Select
Y e s
.
UU438DH_ENG.fm Page 4 Monday, June 13, 2005 7:00 PM
