18
1. Use the
CID/VOL
or key to select desired Caller ID entry.
2. Press
MEM
key, “MEMO # --” shows on the top right corner of
screen.
3. Select the desired memory location by pressing the number keys (0-
9). “ANIMATION 0” shows on screen. “0” means the animation
feature is disabled.
4. Press the number (0-6) or use
CID/VOL
or
to select the
desired animation. The selected animation will be displayed when
the incoming call matches with the number you stored.
5. Press
MEM
again. “RINGER TONE 1” shows on screen.
6. Press 1-3 or 1-6 depending on the model or use
CID/VOL
or
to select the desired ringer tone (6 melody ring tones available for
J50/J60 or 3 tones for J30/J40/J40(BK)). The selected ringer
tone will be heard when the incoming call matches with the number
you stored.
7. Press
MEM
again. “VIP 1YES 2 NO” shows on screen.
8. Press the number (1-2) or use
CID/VOL
or
to select the
desired status. Once tagged as VIP, this caller can bypass the DND
feature.
9. Press
MEM
again to store the number to memory. If the memory
location already contains name and number information, “REPLACE
MEMO?” will show on screen. Press
MEM
again if you want to
replace the information and save. Press
*TONE/EXIT
button to
return the unit to standby mode without saving.
10. If the selected memory location is empty, you will hear a confirmation
tone when the new memory record is saved.
Note: If the selected CID record contains non-digit characters, or the
number is more than 24 digits, the unit will not store the record.
Dialing a Caller ID number
1. Make sure the phone is OFF (not in TALK mode).
2. Use
CID
or to scroll to the desire Caller ID entry.
3. Use
MUTE/FORMAT
key to display the phone number in proper
digits if necessary.
4. Press
TALK/CALL BACK
. The number dials automatically.
CALLER ID FEATURES
