Sanyo CLT-2430 Instruction Manual Download Page 21

Page: 21 / 60

E17

The last three phone numbers dialed can be quickly redialed.

Redialing from standby mode

Press

REDIAL/PAUSE.

The phone number that was last dialed appears in the
display.

Press

REDIAL/PAUSE

again.

Each press of

REDIAL/PAUSE

will display one of the

last three numbers dialed.

Press

TALK/END

Talk

appears in the display, then

the volume setting is displayed.

Then the selected number is dialed. The call time
display appears 5 seconds after line connection.

To hang up, press

TALK/END

(or place the handset on

the base). The call time display remains for about
5 seconds.

<Redial1>
9057609944

REDIAL/PAUSE

<Redial2>
2145551234

<Redial3>
9725554321

Most
recent

TALK/END

Redialing a call

BASICS

With the handset

•

If the dialed number exceeds 32 digits, only the first 32 digits are retained for redialing.

•

If no number has been dialed, you hear an error tone and no redialing will be made.

Notes:

CLT2430 5th 8/9 8/10/00 4:29 PM Page 21

Summary of Contents for CLT-2430




























































Search results

Summary of Contents for CLT-2430

Reviews:

Brands by name

Popular brands

Sanyo CLT-2430, Instruction Manual

Search results

Summary of Contents for CLT-2430

Reviews:

Brands by name

Popular brands