Sanyo CE42WPX1, Instruction Manual

Page: 6 / 76

6
1
. The LCD display will have a Standby light to show there is power.
Switching into/from standby mode
The Standby mode is used for switching the LCD monitor off for
short periods of time. In standby mode the monitor is switched
off but is still receiving mains power.
●
To turn the monitor into standby mode, press the
4
button .
The blue power indicator illuminates more brightly .
●
To turn the monitor ON from standby mode, press any of the
following buttons:
4
,
5
,
6
or
0-9 buttons
.
2. Control buttons (bottom corner of back cover)
Menu/F button:
rotate between volume, Brightness, contrast,
colour, sharpness and OSD language
Input/ OK button: s
witch between TV, AV1,RGB,AV2, HDMI and
PC mode.
e d
buttons:
Change TV and provide up and down
adjustments.
4
button:
To switch from display to standby mode (to switch off
completely disconnect the monitor from the power supply).
Many of your monitors functions are controlled through the menu
function, using the remote control handset.
During menu operation the bottom of the on screen display will
show which controls can be used for menu navigation.
Press the
MENU button to enter the main menu.
A sub menu is selected using the
5
or
6
button
and pressing
the
1
button
when the required sub menu is highlighted.
When you have finished you can press the MENU button to exit,
then the
MENU button
again to exit the main menu.
1.
Press the
MENU button.
Select
Picture
using the
5
or
6
button. Press the
1
button to enter.
Set the picture settings for your “
personal”
preference.
2
. Use the
5
or
6
button
to select eg. Brightness and the
1
or
2
button to adjust levels.
3. Preset :
You can select either your
“Personal”
settings, or
Dynamic, Standard or Eco settings.
4. Noise Reduction:
May be used to reduce any local picture ‘noise’
(granular appearance) being experienced by using
1
or
2
to
select between Mid / Max / Auto / Min / OFF.
5. Dynamic skin tone:
May be used to enhance skin tone by using
1
or
2
to select between On / Off.
Tint :
is only available if NTSC equipment is connected.
6. Text Brightness: May be adjusted by using
1
or
2
button
to select between Min / Mid / Max.To exit press the
MENU
button
twice.
✐
Your personal settings are automatically saved when you exit the
menu.
Controls and Menus
INST
INST
ALLA
ALLA
TION
TION
2
1
GB GB
Picture menu
Brightness
Contrast
Colour
Sharpness
Preset Personal / Dynamic / Standard / Eco
Noise Reduction Mid / Max / Auto / OFF / Min
Dyn. Skin
Text Brightness Max / Mid / Min
Tone ON / OFF
Child lock OFF / ON
OSD language
Timer
Text Language East / West / Cyrillic / Greek
Program Sort (Program sort) - MOVE / DELETE
Program pos.
Program name
Auto sort
Frequency
Skip
ON / OFF
MHz
Memory
OK to save
Off Time OFF/ 5~120
AV2 setting VIDEO/ S-VIDEO
Sound System S-1/ S-2/ S-3/S-4
Country
Volume
Balance
Bass
Treble
Preset Personal /Talk/ Music/ Normal
Surround Mid / Max / OFF
Sound
Picture
: Select : Adjust
MENU
: Back
Brightness
Contrast
Colour
Sharpness
Preset Personal / Dynamic / Standard / ECO
Noise Reduction Mid / Max / Auto /
/ OFF
Dyn. skin tone ON / OFF
Text Brightness Min / Mid / Max
Min
Main Menu
Picture
Sound
Setting
: Select : Adjust
MENU
: Exit
Preset
Menu Operation
If you find the power indicator flashing, disconnect
power cord from the power outlet and contact our
Service desk.
This warning is a sign to let you know that the power
protection function of this TV set is now operating.