Sanyo CE32WH3-F, Service Manual, Page: 13 / 79

To select the mode and service item and change data value
+ Highlight the desired adjustment mode by using the UP or DOWN button and then press the OK button.
+ To select the adjustment item, use the UP or DOWN button.
+ To change the service data, use the Volume -(LEFT) or (RIGHT) button.
+ The data which is set in the service mode is stored into the memory IC automatically.
Exit from the Service Mode
+ Press the RECALL button or turn off the TV set by using the Mains switch.
-13-
F7YLV
STATUS 10
REGULAR NG
1VC1 38
Adjustment Item Adjustment Data
Status
WIDE
1.P V-P
1F
Adjustment Item Adjustment Data
REGULAR mode
WIDE mode
INITIALIZATION OF MEMORY IC
When the memory IC (IC803) is replaced with a new blank IC the default settings will be automatically down loaded
at switch on.
When initialized the memory IC, all of the setting data (option data and service adjustment data) stored in the IC are
reset to the default value. So it is necessary to set the option settings and readjust the service adjustments listed on
left page.