5
■
Off-timer setting
The Off timer will switch the TV set into the standby mode when the
selected time has elapsed.
1. Press the MENU button.
2. Select Timer.
When the time setting column is selected its colour changes to yellow.
The time changes in 30 minute steps.The maximum time is 2:00hrs.
When you are ready to store your settings press the
1
button
and the setting column numbers colour changes to green. The tick
appears as shown above and its colour changes to yellow.
If you have set the off timer, then one minute before the TV switches
a display appears on the screen.
✐
To check the remaining time whilst the TV is operating, press the
r
button.
✐
If the TV set is switched off by the Mains Switch
4
, a power
failure occurs or you enter the preset mode, the timer settings will
be cancelled.
■
Child lock
You can prevent small children from operating the TV with the front
buttons of the TV set.
1. Press the MENU button.
2. Select Setting.
The child lock mode will be reset to “OFF” when the TV set is
switched off with the Mains ON/OFF
3
switch.
■
Setting of AV2 input mode
If you use a VCR which has S-VHS, in order to obtain the best per-
formance you should connect it to AV2 and change the AV2 menu to
S-VIDEO.
1. Press the MENU button.
2. Select Setting.
Press the
1
button to select VIDEO or S-VIDEO.
Press the MENU button repeatedly to return to normal picture.
■
Select the Preset mode.
The preset menu can be used to tune new channels, to reorder
channels and their programme positions, and to make fine adjust-
ments to the tuning.
■
Presetting new channels.
There are two ways to tune in new channels.
Auto : Searches for all channels and stores them automatically.
Semi : Manual search to add channels.
Auto sort : Automatically searches, sorts and stores in the order rel-
evant to the country you are in.
■
Tuning - Auto
1. Press the MENU button.
2. Select Preset press
1
then select Tuning.
3. Select Auto.
When pressing
1
or
2
all available channels are stored. (as
shown in the diagram below).
To cancel this tuning operation, press the MENU button repeatedly.
After completing this procedure, the TV set returns to normal TV
mode and selects programme position “01”.
✐
You can change the order of the station selection, by using the
channel swapping function detailed on page 6.
You do not need to use Memory function at this stage as all channles
are automatically saved.
■
Tuning - Semi
1. Press the MENU button.
2. Select Preset, press
1
then select Tuning, press the
1
,
select Semi.
3. Select the programme position where you want to store a channel.
4. Select the channel search and start searching by pressing the
1
or
2
buttons.
5. When a channel is located searching stops, If you do not want this
channel press
1
or
2
to search again.
✐
You can enter a channel number directly with the 0-9 numeric but-
tons if you know the number.
GENERAL OPERA
GENERAL OPERA
TION
TION
Timer menu
ON-Timer
OFF-Timer
-- --
Picture
Sound
Timer
Setting
Preset
OFF-Timer
00 30
OFF-Timer
00 30
Time setting
column
Not set
Set
Setting menu
Picture
Sound
Timer
Setting
Preset
Child lock
ON
AV2
Child lock
OFF
AV2
Picture
Sound
Timer
Setting
Preset
AV2
VIDEO
Child lock
S-VIDEO
Preset menu
AUTO
CH: 34
P: 02
memory?
CH:35
CH:36
CH:33
CH:34
AUTO
CH: 34
memory?
P: 02
Skip:OFF
Skip:OFF
Tuning
Swap
Fine Tuning
Picture
Sound
Timer
Setting
Preset
Auto
or
Semi
STEREO
ON 05:30
OFF 01:30
03
BBC1
Programme
Position No.
Station Name
Sound Status
On-timer Display
Off-timer Display
Tuning
Swap
Fine Tuning
Picture
Sound
Timer
Setting
Preset
Auto
or
Semi
SEMI
CH: 34
P: 02
memory?
Skip:OFF
CH:35
CH:36
CH:33
CH:34
SEMI
CH: 34
memory?
P: 02
Skip:OFF
SEMI
CH: 34
memory?
P: 04
P:05
P:06
P:02
P:03
Skip:OFF
