6
EB6-D chassis
[SERVICE ADJUSTMENT]
To enter the Service Mode
+ Press and hold the “GREEN” button and the P
▼
button on front control panel. The adjustment item will be
displayed on the screen.
To select the mode and service item and change data value
+ Select the desired adjustment mode (Image or Regular mode ) by using the P
▲
or P
▼
button and then press
the (RIGHT) button.
+ To select the adjustment item, use the P
▲
or P
▼
button.
+ To change the service data, use the Volume -(LEFT) or (RIGHT) button.
+ The data which is set in the service mode is stored into the memory IC automatically.
Image
Note: Some items of the service adjustments for this chassis are controlled by the CPU, IC801, and the
adjustments are carried out by using the RC handset.
IMPORTANT NOTICE
Do not attempt to adjust service adjustments not listed below otherwise it may cause loss of
performance and product safety.
Image
01 P V-P
05
Regular
01 AGC
2A
Image mode
Regular mode
SERVICE ADJUSTMENTS
Adjustment No.
and Item name
Adjustment No.
and Item name
Adjustment Data
Adjustment Data
The available adjustment items are as follows;
Image
: This can be adjusted for picture images/shapes.
Regular : This can be adjusted for the service adjustment.
other
: This is for factory setting. Do not adjust.
TB1251
: This is for the factory setting. Do not adjust.
* Do not adjust items in the “other” and “TB1251” otherwise
the TV set may not operate properly.