5
POWER SUPPLY
AC adaptor
Plug one end of the supplied AC adaptor
into the DC IN 4.5V socket, then plug the
other end into an AC outlet.
•
Use only the supplied AC adaptor
•
If the AC adaptor is connected. The
power supply automatically switches
to the AC power source and the in-
stalled batteries are disconnected.
Alkaline batteries
Install four “R03/AAA” batteries (not
supplied) as shown below. Observe
proper polarity.
Battery replacement
If the batteries are weak, “LOW BAT-
TERY” appears on the display. Replace
the batteries.
• Dispose of all used batteries safety
and in accordance with all applicable
laws.
Note:
When you are not going to use the unit for
one month or more, take the batteries out
of the battery compartment.
CDP-M470_AU
10/05/2004, 18:06
5
