How to turn on the radio and select a band, Tuning
Radio mode select button
B a n d s e l e c t b u t t o n
Tuning button
How to turn on the radio and select a band
1. Press the Radio mode select button (
to turn on the radio.
2. Adjust the volume and tone quality. (See page 8 “Audio
3. Pressing the Band select button (
select the desired band.
With each press, the band shifts as follows.
FM1
Tuning . . . . . . . . . . . . . . .
There are 2 types as follows.
. . . . . . The unit will tune up or down in frequency and stop on
the next strong station. (The tuning normally operates in
the auto mode.)
Press the (
) or (
) side of the Tuning button (
0
To tune
up
Press the (
) side for less than 0.7 seconds.
To tune down
Press the (
) side for less than 0.7 seconds.
. . . . . . With each press, the frequency will shift up or down by
50
(FM) or 9
(AM).
1. Press and hold the (
) or (
) side of the Tuning button (
) for 0.7
0
onds or more to switch to the manual tuning mode. The frequency indicator will
flash on and off.
Note:
It
returns to Auto
(Seek)
tuning mode
if the
Tuning
is not pressed
within 5
seconds after it becomes Manual tuning mode.
2. Press the (
) or (
) side of the Tuning button (
) when the frequency
indicator flashes on and off.
0
H i n t :
l
Press and hold the button to change the frequency quickly.
1 4
