Sanyo ASW-A85HT, Instruction Manual

Page: 6 / 8

10 10
9 9
1 2 3 4 5 6 7 8
15 20 24 27 31 36 43 50
12~20 20~28 28~36 36~50
1. Preparation
1) Make sure to fit the Drain hose.
2) Connect the water supply hose to the faucet and turn the faucet on.
Make sure that some screws of Magic Hose is tighten. Otherwise it may cause water
leak.
3) Plug the Power Cord into a socket
4) Put clothes inside
2. Press POWER ON/OFF button
3. Press START / PAUSE button
Sensor tests the clothes weight automatically.( For NORMAL/HEAVY DUTY/CUSTOM)
Auto choose the proper water level, wash/spin time, rinse type.
(It is not available for the 2 lowest water levels. Need manually set if needed)
4. Use recommended amount of detergent as shown in chart.
5. Close the asher lid
The washer will alarm and stop working before spinning if the washer lid is not closed.
●
●
w
●
Water Level
Water Volume
(Approx. L)
Detergent
Indicators
Powdered
detergent
volume (g)
Other detergent
volume
1. Preparation: Fit the Drain hose, turn the water supply faucet on, plug the Power Cord
into a socket, put clothes inside
2. Press POWER ON/OFF button
3. Press COURSE button choose your needed course according to the clothes.
Please refer to below chart for course choosing.
COURSE CHOOSING GUIDE
COURSE
NORMAL
HEAVY DUTY
DELICATE
BLANKET
CUSTOM
Water Power
Strong
Soft
Blanket
Standard
Standard Normal clothes
Dirty Clothes like working coat
women underwear, articles with embroider
Blanket or Bulky
Kinds of clothes
● Too much detergent causes poor rinsing and too little detergent causes poor washing.
Make sure that nothing remained in pocket. (Pin, coin or something like possibly
damage clothes or washing machine, and the extra noise occurred may cause
trouble to washing machine).
Overturn the clothes to get rid of scraps.
Wool items like women underwear, articles with embroider, nylon etc, should be
placed in a laundry net for extra protection.
Close the fastener and tie loose laces.
Brush the dirty parts like dust, sand.
Put light clothes down. Please pause operation and push it into water when it floats up.
Please separate washing white clothes from coloured clothes, coats from underwear.
●
●
●
●
●
●
●
HOW TO USE COURSE AND PROCESS HOW TO USE COURSE AND PROCESS
NORMAL USAGE NORMAL USAGE
4. Press PROCESS button choose your like cycle. The light moves right one by one when
press.
SOAK → WASH → RINSE → SPIN → PRESET
6. Press WATER LEVEL button, choose proper water level and then put detergent.
7. Press START/PAUSE button.
8. Close the washer lid
If you want to change COURSE or PROCESS during operation, please switch off power,
restart power and choose the course you needed.
●
5. Press SET button to choose SOAK, WASH, SPIN time, RINSE type
and RINSE times.
THE PREPARATION OF LAUNDRY BEFORE WASHING THE PREPARATION OF LAUNDRY BEFORE WASHING
You may adjust the detergent volume according to the type of
detergent-follow recommendations on package.
Suitable Clothes
0 5 1 0 … … 3 5 4 0 0 5 1 0 … … 3 5 4 0
0 1 2 … … 1 9 2 0 0 1 2 … … 1 9 2 0
0 1 2 … … 8 9 0 1 2 … … 8 9
0 1 2 3 0 1 2 3
( This function is not available for DELICATE/
BLANKET course).
● WASH time indicating
● SOAK time indicating
● RINSE times indicating
● SPIN time indicating
( Except the DELICATE course).
( For DELICATE course).
(The number means times,
“ ”
Means Overflow Rinse )
.
0 1 1 2 2 3 3 0 1 1 2 2 3 3